Posts Tagged ‘brandon’

I rode about twenty miles this morning to pick up a cellphone from a craigslist seller. 
About 100 feet from my destination I lost all power to my bike. Awesome....

- Main 30a fuse blew out
- 10a Tail-light/horn fuse blew on the ride over
- I have blown high-beams on 3 headlights in a week
- Removed tail light - Plugged in new fuses (tail and main)
- Main fuse blew instantly(no ignition)
- Disconnected all connectors removed all fuses. 
- inserted main fuse and reconnected main fuse harness. No blowout 
- Reconnected an fuses. No blowout 
- Reconnected computers and flasher relay. No Blowout
- Reconnected Regulator rectifier. Instant blow out.

- Tested out the R/R as shown.


After completing my exhaust sealing and reinstall with Jeff (throughclawseyes). We changed out his license plate bracket. Added some music and posted this video.

Claws Youtube channel. Geekonamotorcycle’s channel.

The one and only04-07-11 Integrated tail light installation
This was not as easy as I thought it would be. As it turns out the plug was put together improperly at the factory. After much trouble shooting and many burnt fuses the problem was discovered and the solution is as presented in the video. Be sure to hit subscribe.

guitar IMG_2700 I finally received my mini helmet cam and I am very happy with the video quality during daylight hours, however the audio leaves very much to be desired. I am searching for an inexpensive microphone/recorder combo at the moment. Until then I will go ahead and load up some video editing software and maybe just write over the audio with music. Below is a sample video. as you can see the video length is only 52 seconds that is because YouTube does not properly recognize mjpg encoded video in an AVI wrapper. I have discovered a solution to this problem going forward.


I recorded my ride to work this morning and should I find time I will chop it up add some music and post it for you tube as another test.


as usual hit comments/subscribe below 🙂